https://doi.org/10.4081/ejtm.2026.15922
Patient-specific 3D-printed implants for reconstruction of elbow nonunion with bone defects: a case report and technical note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Published: 18 September 2026
Distal humeral nonunion associated with extensive bone loss remains one of the most challenging reconstructive conditions in upper-extremity surgery. We present a technically demanding case treated using a patient-specific 3D-printed implant and discuss its potential advantages compared with alternative reconstructive strategies. This case report describes the management of a 59-year-old woman presenting with a hypertrophic distal humeral shaft nonunion three years after intramedullary nailing. Preoperative evaluation included bilateral Computed Tomography (CT) using a dedicated low-artifact acquisition protocol to enable contralateral humeral mirroring, three-dimensional virtual planning, and the design of a patient-specific implant. A custom-made Ti6Al4V implant featuring a cemented proximal stem, a porous metaphyseal interface, and a dual-flange distal fixation platform was manufactured based on the preoperative planning. Reconstruction was performed through a posterior approach with olecranon osteotomy using patient-specific cutting guides. Clinical and radiographic outcomes were prospectively assessed at 1, 3, 6, and 12 months postoperatively. Progressive improvements were observed in elbow motion, MEPS, TCI, and sleep quality (PSQI). By 12 months, the patient achieved near-complete ROM and excellent clinical scores, with radiographs showing full union and stable alignment. At 1 year, however, a fall resulted in proximal stem mobilization, while the distal fixation and porous interface remained stable. This case demonstrates that patient-specific reconstruction can achieve accurate anatomical restoration, stable fixation, and excellent functional recovery in selected patients with complex distal humeral nonunion and bone loss. It also highlights the potential advantages of customized implants, while emphasizing the importance of meticulous preoperative planning, complete implant fixation, and appropriate postoperative protection to minimize the risk of late mechanical failure. Although the present findings are encouraging, further clinical studies are required to establish the long-term effectiveness and broader applicability of this reconstructive strategy.
Downloads
1. Rollo G, Vicenti G, Rotini R, et al. Open reduction and internal fixation using double plating with biological and artificial bone grafting of aseptic nonunions of the distal humerus: clinical results. Strategies Trauma Limb Reconstr 2021;16:144-51. DOI: https://doi.org/10.5005/jp-journals-10080-1533
2. Rollo G, Prkic A, Pichierri P, et al. Plate-and-bone-strut fixation of distal third humeral shaft aseptic non-unions: a consecutive case series. J Clin Orthop Trauma 2019;10:S127-32. DOI: https://doi.org/10.1016/j.jcot.2019.05.004
3. Calori GM, Phillips M, Jeetle S, et al. Classification of non-union: need for a new scoring system? Injury 2008;39:S59-S63. DOI: https://doi.org/10.1016/S0020-1383(08)70016-0
4. Hierholzer C, Sama D, Toro JB, et aòl. Plate fixation of ununited humeral shaft fractures: effect of type of bone graft on healing. J Bone Joint Surg Am 2006;88:1442-47. DOI: https://doi.org/10.2106/JBJS.E.00332
5. Liu B, Wang L, Li X, et al. Applying 3D-printed prostheses to reconstruct critical-sized bone defects of tibial diaphysis (> 10 cm) caused by osteomyelitis and aseptic non-union. J Orthop Surg Res 2024;19:418. DOI: https://doi.org/10.1186/s13018-024-04926-2
6. Wong KC. 3D-printed patient-specific applications in orthopedics. Orthop Res Rev 2016;8:57-66. DOI: https://doi.org/10.2147/ORR.S99614
7. Smolev E, Marchese RM, Sriram V, et al. Is delayed time to surgery associated with increased postoperative complications in patients with pathologic humerus fractures? Eur J Orthop Surg Traumatol 2024;34:3873-9. DOI: https://doi.org/10.1007/s00590-024-04055-w
8. Gaddi D, Gatti SD, Piatti M, et al. Non-union scoring system (NUSS): is it enough in clinical practice? Indian J Orthop 2022;57:137-45. DOI: https://doi.org/10.1007/s43465-022-00767-5
9. Wang Y, Chen H, Wang L, et al. Comparison between osteosynthesis with interlocking nail and minimally invasive plating for proximal- and middle-third humeral shaft fractures. Int Orthop 2021;45:2093-102. DOI: https://doi.org/10.1007/s00264-020-04869-3
10. Hwang Y, Oh J. The relationship between shoulder pain and shoulder disability in women: the mediating role of sleep quality and psychological disorders. Medicine (Baltimore) 2022;101:e31118. DOI: https://doi.org/10.1097/MD.0000000000031118
11. Shamanth M, Vineeth KS, Kiran R, Karigowda H. Functional outcomes of extra-articular distal humerus fractures managed with anatomical locking plates: a prospective cohort study. Cureus 2025;17:e92064. DOI: https://doi.org/10.7759/cureus.92064
12. Rollo G, Rotini R, Eygendaal D, et al. Effect of trochleocapitellar index on adult patient-reported outcomes after noncomminuted intra-articular distal humeral fractures. J Shoulder Elbow Surg 2018;27:1326-32. DOI: https://doi.org/10.1016/j.jse.2018.02.073
13. Vidal L, Kampleitner C, Brennan MÁ, et al. Reconstruction of Large Skeletal Defects: Current Clinical Therapeutic Strategies and Future Directions Using 3D Printing. Front Bioeng Biotechnol 2020;8:61. DOI: https://doi.org/10.3389/fbioe.2020.00061
14. Choo A, Richard MJ. The Role of 3D Custom Implants in Upper Extremity Surgery. J Orthop Trauma 2024;38:S30-6. DOI: https://doi.org/10.1097/BOT.0000000000002760
15. Rovere G, Bosco F, Miceli A, et al. Adoption of blockchain as a step forward in orthopedic practice. Eur J Transl Myol 2024;34:12197. DOI: https://doi.org/10.4081/ejtm.2024.12197
16. Rovere G, Meschini C, Piazza P, et al. Proximal humerus fractures treatment in adult patients with bone metastasis. Eur Rev Med Pharmacol Sci 2022;26:100-5.
17. El Motassime A, Meschini C, Di Costa D, et al. Functional outcomes and shoulder instability in reconstruction of proximal humerus metastases. Curr Oncol 2023;30:3571-9. DOI: https://doi.org/10.3390/curroncol30040272
18. Jia Z, Xu C, Gao W, et al. Evaluation of internal fixation stability of distal humerus C-type fractures based on musculoskeletal dynamics: finite element analysis under dynamic loading. J Orthop Surg Res 2025;20:475. DOI: https://doi.org/10.1186/s13018-025-05876-z
Ethics Approval
CRediT authorship contribution
GM,GCO conceptualization; IGMS, AAJ, methodology, software, formal analysis, data curation; LBM validation, writing – original draft preparation; FCTinvestigation; GRresources; writing – LM review and editing; GR, LM visualization; GR supervision; project administra- tion; all authors have read and agreed to the published ver sion of the manuscript
Supporting Agencies
Data Availability Statement
All data relevant to this case report are included in the article and its supplementary materials. Additional anonymized data may be made available by the corresponding author upon reasonable request, subject to applicable privacy and confidentiality requirements.
How to Cite
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.